Smoke Detector

cts egypt supplies products that will enhance the safety of your building in the Middle East. We have designed our products to satisfy the extra low voltage requirements of our customers. Our safety solutions include fire detection and notification systems, battery operated fire, smoke and gas detectors, fire rated cables, fire alarms and much more.

The Shield photoelectric smoke detector is designed for residential and commercial residential applications, including homes, apartments, hospitals, hotels and motels, in compliance with UL217, UL1730 applicable IBC/IFC and NFPA72.

Available in many different models, the detector is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The range is provided with a 9VDC alkaline battery for back-up in the event building power is lost. The battery impedance is verified and the alarm provides a low or missing battery warning.

This range of detector provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA72 and UL Standards.

Options include self-restoring 135°F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation. Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on “R” models, which activate the dry contacts from the tandem wire or a local alarm.

  • Available in 220VAC with 9VDC battery back-up
  • Horn frequency 3100 Hz (nominal)
  • Nominal 2.5% sensitivity
  • Patented three position test switch
  • Relays operate on battery back-up
  • Quick-disconnect wiring harness
  • 90dBA temporal 3 evacuation piezo horn
  • 5-to-1 signal-to-noise ratio
  • Pulsing LED sensing chamber
  • Fully insect screened
  • Interconnect with all tandem capable smoke alarms
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting hardware adapts to standard junction boxes
  • Dust cover to prevent contamination during installation
  • Low or missing battery indicator

Your email address will not be published. Required fields are marked *

Hit enter to search or ESC to close