Analog Control Panel (1 Loop)
cts egypt supplies products that will enhance the safety of your building in the Middle East. We have designed our products to satisfy the extra low voltage requirements of our customers. Our safety solutions include fire detection and notification systems, battery operated fire, smoke and gas detectors, fire rated cables, fire alarms and much more.
Loop capacity 235 addresses loop 1 can be expanded to 2 loops
8x18 Graphical LCD Display
30 Zone indication including manual intervention and control
3 programmable alarm output
Positive Alarm Signal (PAS) Pre-alarm
Maintenance report of dirty detector
Networkable with all SHIELD Intelligent Fire Alarm panels
Programmable form PC by SHIELD
History log 999-events capacity in non-volatile memory
Test facility
RS485 Repeater Output (Max. 10)
Built-in gas extinguishing control.
Advanced user friendly programming software including ‘Fuzzy Logic’
Optional Colour Graphics
Optional Fireman’s Control Panel
Optional Panel Printer
| Standard | EN54 Part 2/4; BS5839 part 4 |
|---|---|
| Approvals | LPCB, CE |
| Main Input Voltage | 220 ± 10% VAC 50/60 Hz |
| Input Current Rating | 0.500A |
| System Operating Voltage | 24 VDC Nominal (20-27 VDC) |
| Loop Capacity | Loop 1:235; Loop 2:241 (Address) |
| Loop Length | 1.00mm2-800M-Full Load 1.5mm2-1.2KM-Full Load 2.0mm2-1.5KM-Half Load |
| Loop Topology | Class A and Class B |
| 24 VDC Fused Relay Output | Maximum Load 500mA at 17-28 VDC |
| Zone Capacity | 30 Zones Programmable |
| Standby Batteries | Twin 12Vdc; Bat: 24H |
| Sounder Circuits(3) | Fire Alarm Output: 500mA/24Vdc/NO-NC F.P.E. Output: 500mA/24Vdc/NO-NC Sounder Circuit Output: 500mA/24Vdc/NO-NC |
| Fuses | Mains 2A (20mm A/S ceramic), Sounders (2): 1A (20mm A/S), Fire alarm Output 0.5A (20mm A/S), Battery: 2A (20mm A/S HRC ceramic) |
| Common Fault Relay Output | Volt-Free changeover 1.0A at 24 VDC |
| Battery Charging Current Limit | 600mA |
| Dimension | Outer: 580x420x30 mm, Inner: 550x393x173mm |
Your email address will not be published. Required fields are marked *